◀◀  Key Selling Points  ▶▶

1. High-Precision Monitoring

Dual detection: Measures leaf wetness (0–100%) and temperature (-50°C to 80°C) with ultra-fine resolution (0.01% for moisture, 0.01°C for temperature). ±3% accuracy (0–50% wetness) and ±0.5°C temperature precision ensure reliable data for pest prevention and irrigation control.

2. Rugged & Weatherproof Design

IP67 waterproof rating withstands harsh outdoor conditions like rain, dust, and extreme temperatures (-40°C to 85°C).

Denser simulated leaf veins (15/cm) detect tiny droplets and ice crystals, mimicking real leaf surfaces.

3. Smart Connectivity & Customization

RS485/RS232/UART outputs with MODBUS-RTU protocol enable seamless integration into IoT systems.

Flexible parameter adjustments: Set baud rates (1200–38400), station addresses (1–255), and user-defined device IDs for multi-sensor networks.

4. Low Power & Fast Response

Peak current <30mA and rapid <1s response time for real-time monitoring.

Supports DC 5–24V power input with wide compatibility for agricultural setups.

5. User-Friendly Calibration

Simple 3-step calibration (0%, 50%, 100%) via pre-defined commands for accuracy maintenance.

Key Features:

• Precision Agriculture Tool: 0.01% moisture resolution & ±0.5°C temperature accuracy.

• Built to Last: IP67-rated, survives -40°C to 85°C.

• Smart Farming Ready: MODBUS-RTU protocol for IoT integration.

• Energy-Saving: 30μA standby, 10mA active. Customizable: Adjust baud rates, station IDs, and user tags.

• Fast & Efficient: <1s response time, low power consumption.

◀◀  Product Parameters  ▶▶

◀◀  Application Scenarios  ▶▶

◆◆ Applications:  

• Crop disease prevention

• Smart irrigation systems

• Greenhouse climate control

• Forestry and environmental research

◆◆ Installation

The sensor is fixed near the plant according to the tilt Angle of the plant leaf(Foliar) surface. The area with white leaf(Foliar) veins is the sensor's sensing area, which must receive the same spraying, foliar fertilization and moisturizing operations as the plant leaf(Foliar) surface to ensure the accuracy of the measurement.

◆◆ Maintenance

If too much dust or water is deposited on the sensor's white veined surface, spray it with clean water or gently wipe it with a clean wet cloth to ensure accurate measurement.

◆◆ Attention in Use

1) Black wire and white wire should be connected together when using.

2) Do not pull the lead wire of the sensor forcibly, and do not beat or hit the sensor violently.

3) Avoid scratches on the sensor surface.

4) The sensor protection level is IP67, which can be sprayed and soaked in water for a short time.